INSTRUCTIONS FOR USE

Instructions for using the Carpuject™ Syringe are available with the reusable Carpuject™ Holder, List 2049-02.

Carpuject™ Single-dose cartridges are to be used ONLY with Carpuject™ Holders, List 2049-02.

To Use iSecure™ Syringe

1. Remove green tamper evident band in a clockwise motion.
2. Depress (Push) the plunger rod. This will loosen the plunger rod that is located on the outside of the syringe barrel so that the plunger rod can be removed. This will also engage the syringe.
Remove the plunger rod.
Insert the plunger rod into the back end of the syringe barrel and turn clockwise 2 to 3 times to attach.
BEFORE REMOVING LUER TIP CAP, hold the syringe with tip cap upright. Press syringe plunger until plunger moves slightly. This motion breaks the seal between plunger and syringe barrel.
3. Twist the luer tip cap clockwise or counterclockwise to break the tamper evident label. Remove the luer tip cap and discard it. Expel the air by pushing on the plunger rod. Attach needle or blunt cannula if required.